The RCO40LP is a double acting tool primarily intended for use on steel wire rope, having a maximum tensile strength of 1960N/mm and will cut ropes up to 38mm diameter.
The cutting range begins at 25mm diameter wire rope with a maximum tensile strength of 2160N/mm up to 38mm diameter with maximum tensile strength of 1960N/mm.
IMPORTANT: Please note this tool is capable of cutting wire rope with a minimum strand diameter of 1.5mm. For wire rope with smaller strands please consider the cutters vs grade table below. We also recommend that cutting is performed at a distance no less than 10X rope diameter from the end, otherwise premature blade failure may occur.
Heavy duty wire rope cutter designed for use in severe working conditions
Open sided design allows for easy positioning of the cutter on the cable
Blade shaped anvil cuts higher grade cable
Corrosion resistant stainless steel body with Nitrotec coated alloy steel cylinder
Long blade and anvil life ensures that tool maintenance is kept to a minimum
Webtool™ RCO40LP Cutter
The RCO40LP is a double acting tool primarily intended for use on steel wire rope, having a maximum tensile strength of 1960N/mm and will cut ropes up to 38mm diameter.
The cutting range begins at 25mm diameter wire rope with a maximum tensile strength of 2160N/mm up to 38mm diameter with maximum tensile strength of 1960N/mm.
IMPORTANT: Please note this tool is capable of cutting wire rope with a minimum strand diameter of 1.5mm. For wire rope with smaller strands please consider the cutters vs grade table below. We also recommend that cutting is performed at a distance no less than 10X rope diameter from the end, otherwise premature blade failure may occur.
Related products
Stanley GR29 Grinder
Read moreMirage Diamond Wire Cutter
Read moreTritech AnchorZip 10 Heavy Duty Suction A P
Read more